Easel hand made

Easel hand made

Easel hand made

For the construction of the easel, I spent six hours, but I did it in the first, so if you have at least some experience of what you can do it faster. Cost of materials of about $ 8. – Beam itself cuts, hooks and eyelet, the paint I had. Such a timber (timber), you can buy on the market with a system of materials, or the supermarket in the building … If you want a detailed drawing of what you can get it here: http://t2fish.promodj.ru/ This easel is suitable for drawing and for exhibitions. If you want to save time and money, you can not paint it or polish with sandpaper, but it is fraught with splinters and rapid deterioration of wood! While working with an easel, it became clear that the rear support leg to do not one, but two rails, so it will be more stable, it will not be three feet and four feet.

Tools: wood saw, miter box, nazhdachnoya paper drill bit screwdriver, drill wood of 6 mm Phillips screwdriver, hammer, brush.

Materials:

The wood can be purchased at any store which sells building materials in the lumber department.
wood scantling (thickness 20 mm, width 40 mm, length 2500 mm) – 4 units. For the fourth leg esche need one board. and the 5 units,
wood scantling (thickness 40 mm, width 40 mm) – 1 units, screws for wood,
c anchor hook and nut – (length of 100mm thickness 5mm) – 2 units,
paint (acrylic used 200 grams),
Screws for wood (20 mm) 10 units. and (60 mm) 16 units
hinge (30 mm steel) – 1 units,
strap from the old bags 70 mm – 1 units,
Made in the Art Studio “Design Kio” http://www.designkio.com/
for the “Club of creative people,” Rozum » http://www.rozym.org/
Music: DJ TITOFF http://t2fish.promodj.ru/
Video: Nikon D5100